Westcoat Safe Grip | CA-30 Small | Non-Skid Additive for Sealers and Topcoats | 32 oz | Professional-Grade

CA-30 Small Safe Grip is a Non-Skid Additive that can be added to epoxies, polyaspartics, sealers or topcoats to produce a skid resistant surface to help reduce slip hazards. This lightweight product will remain suspended in most coatings. CA-30 can be added to many Westcoat products, such as: EC-11 Water-Based Epoxy, EC-12 Epoxy Primer. EC-32 High Build Clear Epoxy Topcoat, EC-34 Epoxy Topcoat, EC-38 Liquid Dazzle Epoxy, EC-95G Gloss Polyurethane Topcoat, EC-95F Flat Polyurethane Topcoat, EC-101 Polyaspartic, EC-102 Polyaspartic, SC 10 Acrylic Topcoat, SC-42 Water-Based Acrylic Sealer, SC-65 WB Polyurethane Sealers, SC-70 Acrylic Lacquer Sealer and SC-71 High VOC Acrylic Lacquer Sealer to produce a skid resistant finish. Do not apply in temperatures below 55°F or above 95°F. Not intended for use with any Non-Westcoat brands. Not designed to be broadcast. It is strongly suggested that all limitations and attributes are disclosed to customer and end user. Westcoat takes no responsibility for slippery surfaces; the applicator and the customer determine the texture; if additional skid resistance is required, please contact seller for recommendations. Do not use more CA-30 than recommended. Do not allow any Westcoat products to freeze.

• Non-Skid Additive that can be added to epoxies, polyaspartics, sealers or topcoats to produce a skid resistant surface to help reduce slip hazards. This lightweight product will remain suspended in most coatings with a more aggressive texture than CA-29
• Works in Clear and Pigmented Coatings
• Easy to Use
• MIX RATIO | 32 ounces by volume per 5 gallons of: SC-10, SC-42, SC-70 or SC-71; 32 ounces by volume per 3 gallons of: EC-11, EC-12, EC-32, EC-34, EC-38, EC-95G, EC-95F, EC-101, EC-102 or SC-65
• DIRECTIONS | Scan QR code on the container for full product specs and application instructions at the Westcoat website; This product is designed for professional use only